LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Camry Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System (Diagnostics - Introduction) (Except Hybrid) >> Meter / Gauge System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.
    5. Check for DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Combination Meter / Trouble Code.
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals