LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Prius >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Combination Meter >> Installation >> Installation

Combination Meter: Installation: Installation

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Engage the clip.
      Fig 1: Identifying Combination Meter Assembly
      GTY222445Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the combination meter assembly with the 3 screws.
    3. Engage the clamp.
    4. Connect the connector.
  2. INSTALL NO. 1 HEATER TO REGISTER DUCT  . Refer to INSTALLATION - Step 10
  3. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY 
    1. Install the upper instrument panel assembly. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals