DTC Summary

DTC No.	Monitoring Item	Malfunction Detection Condition	Trouble Area	Detection Timing	Detection Logic
P0455	EVAP gross leak	Leak detection pump creates negative pressure (vacuum) in EVAP system and EVAP system pressure measured. Reference pressure measured at start and at end of leak check. If stabilized pressure higher than [second reference pressure x 0.2], ECM determines that EVAP system has large leak.	Fuel tank cap (loose) Leaks from EVAP line (Canister - Fuel tank) Leaks from EVAP line (Purge VSV - Canister) Canister pump module Leaks from fuel tank Leaks from canister	While ignition switch off	2 trip
P0456	EVAP small leak	Leak detection pump creates negative pressure (vacuum) in EVAP system and EVAP system pressure measured. Reference pressure measured at start and at end of leak check. If stabilized pressure higher than second reference pressure, ECM determines that EVAP system has small leak.	Fuel tank cap (loose) Leaks from EVAP line (Canister - Fuel tank) Leaks from EVAP line (Purge VSV - Canister) Canister pump module Leaks from fuel tank Leaks from canister	While ignition switch off	2 trip