LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Matrix Base, Automatic >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> Drive Shaft / Propeller Shaft (Service Information) >> REAR DRIVE SHAFT ASSEMBLY (for 4WD) >> Inspection >> Inspection

REAR DRIVE SHAFT ASSEMBLY (for 4WD): Inspection: Inspection

  1. INSPECT REAR DRIVE SHAFT ASSEMBLY 
    1. Check that there is no excessive play in the radial direction of the outboard joint.
      Fig 1: Inspecting Rear Drive Shaft Assembly
      GTY189350Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the inboard joint slides smoothly in the thrust direction.
    3. Check that there is no excessive play in the radial direction of the inboard joint.
    4. Check the boots for damage.