Ball Joint: Specifications

FRONT LOWER BALL JOINT

Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the 5th turn.

Turning Torque (for 2AZ-FE) - Torque 1.0 to 3.4 Nm (10 to 35 kgf-cm, 9 to 30 in-lbf

Turning Torque (for 2ZR-FE) - Torque 1.0 to 4.9 Nm (10 to 50 kgf-cm, 9 to 43 in-lbf