Disassembly

STEERING GEAR / LINKAGE: STEERING GEAR (for 4WD): DISASSEMBLY

1. REMOVE STEERING RACK BOOT CLIP (for LH Side)

(a) Using pliers, remove the steering rack boot clip.

2. REMOVE STEERING RACK BOOT CLIP (for RH Side)

HINT
Perform the same procedure as for the LH side.

3. REMOVE NO. 2 STEERING RACK BOOT CLAMP

(a) Using a screwdriver, remove the No. 2 steering rack boot clamp.





NOTICE:
Be careful not to damage the No. 2 steering rack boot.

4. REMOVE NO. 1 STEERING RACK BOOT CLAMP

HINT
Perform the same procedure as for the No. 2 steering rack boot clamp.

5. REMOVE NO. 2 STEERING RACK BOOT

6. REMOVE NO. 1 STEERING RACK BOOT