Installation

HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: INSTALLATION

1. INSTALL BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)

(a) Install the blower motor sub-assembly with the 3 screws.





(b) Connect the connector.

(c) Engage the clamp.

2. INSTALL BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)

(a) Install the blower motor sub-assembly with the 3 screws.





(b) Connect the connector.

(c) Engage the clamp.

(d) Install the quick heater connector screw.

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover) Installation