Light Control Rheostat: Installation: Installation

INSTALL LIGHT CONTROL RHEOSTAT
1. Attach the 2 claws to install the rheostat.
  
  Fig 1: Identifying Light Control Rheostat Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY See step 2
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH See step 3
INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH See step 4
INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION See step 5
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH See step 6
ENABLE AUTO TILT AWAY FUNCTION
1. Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter, refer to CUSTOMIZE PARAMETERS .