Differential Oil Seal: Replacement: Replacement

1. Remove the front fender liner LH, refer to REMOVAL - Step 5 .
2. Remove the front fender apron seal LH, refer to REMOVAL - Step 14 .
3. Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the automatic transaxle.
   Fig 1: Identifying No. 1 Transmission Oil Filler Tube Location

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the refill plug and gasket from the automatic transaxle.
   Fig 2: Locating Refill Plug

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle.
   Fig 3: Identifying No. 1 Transmission Oil Filler Tube Location

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Drain automatic transaxle fluid from the automatic transaxle.
7. Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the automatic transaxle.
   Fig 4: Identifying No. 1 Transmission Oil Filler Tube Location

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 0.8 N*m (8 kgf*cm, 7 in.*lbf) 

8. Using a 6 mm hexagon socket wrench, install a new gasket and the overflow plug to the automatic transaxle.
   Fig 5: Identifying No. 1 Transmission Oil Filler Tube Location

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) 

9. Install a new gasket and the refill plug to the automatic transaxle.
   Fig 6: Locating Refill Plug

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf) 

10. Install the front fender apron seal LH, refer to INSTALLATION - Step 81 .
11. Install the front fender liner LH, refer to INSTALLATION - Step 1 .

Refer to REMOVAL

1. Using SST, tap out the transaxle case oil seal.
   Fig 7: Removing Transaxle Case Oil Seal

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   • SST: 09308-00010 

1. Using SST, tap out the front transaxle case oil seal.
   Fig 8: Removing Front Transaxle Case Oil Seal

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   • SST: 09308-00010 

1. Using SST and a hammer, tap in a new front transaxle case oil seal.
   Fig 9: Installing Transaxle Case Oil Seal

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   • SST: 09316-60011 
   • SST: 09950-70010 
     • 09951-07100

   Oil seal driven in depth

   -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

   NOTE:

   Check that the oil seal is installed in the correct direction.

2. Coat the lip of the front transaxle case oil seal with MP grease.

1. Using SST and a hammer, tap in a new transaxle case oil seal.
   Fig 10: Tapping Front Transaxle Case Oil Seal

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   • SST: 09316-60011 
     • 09316-00011

   Oil seal driven in depth

   -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

   NOTE:

   Check that the oil seal is installed in the correct direction.

2. Coat the lip of the transaxle case oil seal with MP grease.

Refer to INSTALLATION

Refer to ADJUSTMENT