LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire & Wheel (Service Information) (Hybrid) >> Tire Pressure Warning Receiver >> Installation >> Installation

Tire Pressure Warning Receiver: Installation: Installation

  1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY 
    1. Connect the connector.
    2. Install the tire pressure warning receiver assembly with the bolt.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

  2. INSTALL ROOF HEADLINING ASSEMBLY 

    Refer to INSTALLATION

  3. INSPECT TIRE PRESSURE WARNING SYSTEM 

    Refer to TEST MODE PROCEDURE

scientia non olet · About LEMON Manuals