On-Vehicle Inspection
- INSPECT COOLER CONDENSER ASSEMBLY
- If the cooler condenser assembly fins are dirty, clean them with water and dry with compressed air.NOTE:
Do not damage the cooler condenser assembly fins.
- If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers.
- If the cooler condenser assembly fins are dirty, clean them with water and dry with compressed air.
- INSPECT CONDENSER FOR LEAKAGE OF REFRIGERANT
- Using a gas leak detector, check pipe joints for gas leakage.
- If gas leakage is detected in a joint, check the torque of the joint.