Speed Sensor: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL SPEED SENSOR
1. Install the speed sensor to the valve body with the 2 bolts.
  
  Fig 1: Identifying Speed Sensor And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
2. Connect the connector.
INSTALL TRANSMISSION VALVE BODY ASSEMBLY See step 2
INSTALL VALVE BODY OIL STRAINER ASSEMBLY See step 3
INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See step 4
INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT:

Refer to INSTALLATION