LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid >> Repair and Diagnosis >> Electrical >> Gauges >> Combination Meter (Diagnostic Codes & Symptom Tests) (Hybrid) >> Meter / Gauge System >> Hybrid System Indicator Malfunction >> Inspection Procedure

Inspection Procedure

HINT: 

If there is an open or short in the EV drive mode switch circuit, or the pattern select switch circuit, the hybrid vehicle control ECU outputs DTCs. Perform troubleshooting with the "P313 Hybrid Control System", refer to EV Drive Mode Switch Circuit for EV drive mode switch circuit, refer to Pattern Select Switch Circuit for Pattern select switch circuit).