Fuel Receiver Gauge Malfunction: Description

The meter CPU uses the fuel sender gauge assembly to determine the level of the fuel in the fuel tank. The resistance of the fuel sender gauge will vary between approximately 4 Ω with the float at the full position, and 110 Ω with the float at the empty position. The meter outputs battery voltage through two 220 Ω resistors that are mounted in parallel inside the meter CPU. The meter CPU measures the voltage between the variable resistor in the fuel sender gauge and the two resistors mounted in parallel in the meter. Voltage measured at this point will vary as the float of the fuel sender gauge is moved. The highest voltage observed should be approximately half of the auxiliary battery voltage.

NOTE:

The fuel level warning light will come on when the fuel level is below 11.0 liters.