LEMON Manuals: Even more car manuals for everyone

Home >> Toyota >> 2011 >> Highlander Hybrid >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Electronically Controlled Brake System (Diagnostic Codes & Symptom Tests) (Hybrid) >> Electronically Controlled Brake System >> DTC C1442/44: Invalid Data Received from Acceleration Sensor; DTC C1443/34: Invalid Data Received from Yaw Rate Sensor >> Inspection Procedure

Inspection Procedure

NOTE:

When replacing the yaw rate and acceleration sensor, perform zero point calibration, refer to CALIBRATION .

scientia non olet · About LEMON Manuals