LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Electronically Controlled Brake System (Diagnostic Codes & Symptom Tests) (Hybrid) >> Electronically Controlled Brake System >> DTC C1380/64: Stop Light Control Relay Malfunction >> Inspection Procedure

Inspection Procedure

NOTE:

When replacing the skid control ECU, perform initialization and calibration of the linear solenoid valve, refer to INITIALIZATION .

HINT: 

When C1249/49 is output together with C1380/64, inspect and repair the trouble areas indicated by C1249/49 first, refer to DTC C1249/49: Open in Stop Light Switch Circuit .

scientia non olet · About LEMON Manuals