Inspection Procedure
NOTE:
When replacing the brake actuator assembly, perform initialization and calibration of the linear solenoid valve, refer to INITIALIZATION .
HINT:
When C1364/61 is output together with C1341/62, C1342/63, C1343/64 and/or C1344/65, inspect and repair the trouble areas indicated by C1364/61 first, refer to DTC C1246/46: Master Cylinder Pressure Sensor Malfunction; DTC C1281/81: Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC); DTC C1364/61: Wheel Cylinder Pressure Sensor Malfunction .