DTC C1249/49: Open in Stop Light Switch Circuit: Description
The skid control ECU receives the stop light switch signal and detects the brake pedal operation status.
The skid control ECU has an open detection circuit, which outputs this DTC if it detects an open in the stop light input line or ground line of the stop light circuit with the stop light switch off (brake pedal not depressed).
| DTC Code | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1249/49 | 520 | When IG2 terminal voltage is 9.5 V or more, an open stop light switch circuit continues for 10 seconds or more. |
|