LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Electronically Controlled Brake System (Diagnostic Codes & Symptom Tests) (Hybrid) >> Electronically Controlled Brake System >> DTC C1247/47: Stroke Sensor Malfunction; DTC C1346/71: Stroke Sensor Zero Point Learning Malfunction (Test Mode DTC); DTC C1392/48: Stroke Sensor Zero Point Calibration Undone >> Inspection Procedure

Inspection Procedure

NOTE:

When replacing the skid control ECU or brake pedal stroke sensor, perform initialization and calibration of the linear solenoid valve, refer to INITIALIZATION .

HINT: 

Check the condition of each related circuit connector before troubleshooting, refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE .

scientia non olet · About LEMON Manuals