LEMON Manuals: Even more car manuals for everyone

Home >> Toyota >> 2011 >> Highlander Hybrid >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Electronically Controlled Brake System (Diagnostic Codes & Symptom Tests) (Hybrid) >> Electronically Controlled Brake System >> DTC C1246/46: Master Cylinder Pressure Sensor Malfunction; DTC C1281/81: Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC); DTC C1364/61: Wheel Cylinder Pressure Sensor Malfunction >> Inspection Procedure

Inspection Procedure

NOTE:

When replacing the skid control ECU or brake actuator assembly, perform initialization and calibration of the linear solenoid valve, refer to INITIALIZATION .

scientia non olet · About LEMON Manuals