LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Electronically Controlled Brake System (Diagnostic Codes & Symptom Tests) (Hybrid) >> Electronically Controlled Brake System >> DTC C1240/95: Yaw Rate Sensor Discrimination >> Inspection Procedure

Inspection Procedure

NOTE:
  • When replacing the skid control ECU, perform initialization and calibration of the linear solenoid valve, refer to INITIALIZATION .
  • When replacing the yaw rate and acceleration sensor, perform zero point calibration, refer to CALIBRATION .
scientia non olet · About LEMON Manuals