ABS Warning Light Remains ON: Description

The skid control ECU is connected to the combination meter via CAN communication.

If any of the following is detected, the ABS warning light remains on:

• The skid control ECU connectors are disconnected from the skid control ECU.
• There is a malfunction in the skid control ECU internal circuit.
• There is an open in the harness between the combination meter and the skid control ECU.
• The ABS control system is defective.

HINT: 

• The master warning light will come on and a check ABS message will be displayed on the multi-information display if ABS control cannot be performed.
• In some cases, the Techstream cannot be used when the skid control ECU is malfunctioning.