LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) >> Back Door Opener Switch >> Removal >> Removal

Back Door Opener Switch: Removal: Removal

  1. REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY  See step  2
  2. REMOVE BACK DOOR TRIM COVER LH (w/o Power Back Door)  See step  3
  3. REMOVE BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)  See step  4
  4. DISCONNECT POWER BACK DOOR ROD (w/ Power Back Door)  See step  5
  5. REMOVE BACK DOOR TRIM COVER LH (w/ Power Back Door)  See step  6
  6. REMOVE BACK DOOR TRIM COVER RH  See step  7
  7. REMOVE BACK DOOR LOCK COVER (for Glass Hatch Type)  See step  8
  8. REMOVE ASSIST STRAP HOLE COVER  See step  9
  9. REMOVE ASSIST STRAP ASSEMBLY  See step  10
  10. REMOVE BACK DOOR TRIM PANEL ASSEMBLY  See step  11
  11. REMOVE BACK DOOR OUTSIDE GARNISH ASSEMBLY  . Refer to REMOVAL - Step 11
  12. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY 
    1. Remove the back door opener switch assembly.
      Fig 1: Identifying Back Door Opener Switch Assembly
      GTY199392Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals