STEERING GEAR (for 2GR-FE): Disassembly: Disassembly

WARNING: This page is about a different variant/trim than selected.

REMOVE STEERING RACK BOOT CLIP (for LH Side)
1. Using pliers, remove the steering rack boot clip.
REMOVE STEERING RACK BOOT CLIP (for RH Side)
HINT:

Perform the same procedure as for the LH side.
REMOVE NO. 2 STEERING RACK BOOT CLAMP
1. Using a screwdriver, remove the No. 2 steering rack boot clamp.
  
  Fig 1: Identifying No. 2 Steering Rack Boot Clamp & Screwdriver
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Be careful not to damage the steering rack boot.
REMOVE NO. 1 STEERING RACK BOOT CLAMP
HINT:

Perform the same procedure as for the No. 2 steering rack boot clamp.
REMOVE NO. 2 STEERING RACK BOOT
REMOVE NO. 1 STEERING RACK BOOT