Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
ALL:
| The monitor will run whenever these DTCs are not present. | None |
ENGINE COOLANT TEMPERATURE SENSOR COLD START MONITOR:
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| Engine coolant temperature at engine start | Less than 60°C (140°F) |
| Engine coolant temperature sensor circuit (P0115, P0117, P0118, P0125) | OK |
| Intake air temperature sensor circuit (P0112, P0113) | OK |
| Soak time | 0 second or more |
| Accumulated mass air flow | 1643 g or more |
| Engine | Running |
| Fuel cut | OFF |
| Difference between engine coolant temperature at engine start and intake air temperature | Less than 40°C (104°F) |
ENGINE COOLANT TEMPERATURE SENSOR SOAK MONITOR:
| Battery voltage | 10.5 V or more |
| Engine | Running |
| Soak time | 5 hours or more |
| Engine coolant temperature at engine start | 60°C (140°F) or more |
| Accumulated mass air flow | 3047 g or more |