Inspection Procedure
WARNING: This page is about a different variant/trim than selected.
| Abnormal bank | Advanced timing over (Valve timing is out of specified range) |
Retarded timing over (Valve timing is out of specified range) |
|---|---|---|
| Bank 1 | P0014 | P0015 |
| Bank 2 | P0024 | P0025 |
HINT:
- If DTC P0014 or P0015 is displayed, check the bank 1 VVT system circuit.
- Bank 1 refers to the bank that includes the No. 1 cylinder*.
*: The No. 1 cylinder is the cylinder which is farthest from the transmission.
- Bank 2 refers to the bank that does not include the No. 1 cylinder.
- If DTC P0024 or P0025 is displayed, check the bank 2 VVT system circuit.
- Read freeze frame data using the Techstream. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was running or stopped, whether the engine was warmed up or not, whether the air fuel ratio was lean or rich, as well as other data recorded at the time of a malfunction.