Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
CASE 1:
| The monitor will run whenever these DTCs are not present | None |
| Ignition switch | ON (IG) |
| Engine | Running |
| Battery voltage | 8 V or more |
| Starter | OFF |
CASE 2:
| Internal engine OFF timer (elapsed time from engine stop) | 10 to 30 minutes |
| Battery voltage | 8 V or more |
| Ignition switch | ON (IG) |
| Starter | OFF |
CASE 3:
| Internal engine OFF timer (elapsed time from engine stop) | 40 minutes |
| Battery voltage | 8 V or more |
| Ignition switch | ON (IG) |
| Starter | OFF |