DTC P2810: Pressure Control Solenoid "G" Electrical (Shift Solenoid Valve SL4): Description
WARNING: This page is about a different variant/trim than selected.
Changing from 1st to 6th is performed by the TCM turning shift solenoid valves SL1, SL2, SL3, SL4 and SL on and off. If an open or short circuit occurs in any of the shift solenoid valves, the TCM controls the remaining normal shift solenoid valves to allow the vehicle to be operated, refer to FAIL-SAFE CHART
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P2810 | The TCM checks for an open or short in the shift solenoid valve SL4 circuit while driving and shifting gears. (1-trip detection logic)
|
|