Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
OFF MALFUNCTION (A):
| Turbine speed - Output speed x Gear ratio | 1,000 RPM or more |
OFF MALFUNCTION (B):
| Turbine speed / Output speed | 3.232 to 7.556 |
ON MALFUNCTION (A) AND (B):
| Turbine speed / Output speed | 1.369 to 1.613 |
ON MALFUNCTION (C):
| Turbine speed / Output speed | 0.690 to 0.818 |
ON MALFUNCTION (D):
| Turbine speed / Output speed | 0.976 to 1.113 |