Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
| Monitor runs whenever following DTCs not stored | None |
| All of the following conditions are met | Condition A, B, C and D |
| A. Spark cut | Not operating |
| B. Either of following conditions met | - |
| (a) Engine speed | 1500 RPM or less |
| (b) Starter | OFF |
| C. Either of following conditions met | - |
| Both of following conditions met | - |
| (a) Engine speed | 500 RPM or less |
| (b) Battery voltage | 6 V or higher |
| D. All of following conditions met | - |
| (a) Engine speed | More than 500 RPM |
| (b) Battery voltage | 10 V or higher |
| (c) Number of sparks after CPU reset | 5 sparks or more |