DTC P0014: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1); DTC P0015: Camshaft Position "B" - Timing Over-Retarded (Bank 1): Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC P0013, refer to DESCRIPTION .

DTC No.	DTC Detection Condition	Trouble Area
P0014	Exhaust valve timing is stuck at a certain valve when in the advance range (2 trip detection logic).	Valve timing Camshaft timing oil control valve assembly (for exhaust camshaft) Oil control valve filter Camshaft timing gear assembly (for exhaust camshaft) ECM
P0015	Exhaust valve timing is stuck at a certain valve when in the retard range (1 trip detection logic).