Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
| One of following conditions met | Condition A, B or C |
| A. All of following conditions met | Condition (a), (b) and (c) |
| (a) Battery voltage | 11 to 13 V |
| (b) Target duty ratio | Less than 70% |
| (c) Output signal duty ratio | 100% or more |
| B. All of following conditions met | Condition (a), (b) and (c) |
| (a) Battery voltage | 13 V or more |
| (b) Target duty ratio | Less than 80% |
| (c) Output signal duty ratio | 100% or more |
| C. All of following conditions met | Condition (a) and (b) |
| (a) Current cut status | Not cut |
| (b) Output signal duty ratio | 3% or less |