LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Seat Belt (Service Information)) >> Rear Center Seat Outer Belt Assembly >> Installation >> Installation

Rear Center Seat Outer Belt Assembly: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY 
    1. Install the rear center seat outer belt assembly with the bolt and nut.
      Fig 1: Identifying Rear Center Seat Outer Belt Assembly Bolt & Nut
      GTY171968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Bolt 

      Torque: 7.5 N*m (77 kgf*cm, 66 in.*lbf) 

      Nut 

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

  2. INSTALL BELT SUPPORT PLATE 
    1. Engage the 3 claws to install the belt support plate.
      Fig 2: Identifying Belt Support Plate Claws
      GTY184738Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL REAR NO. 1 SEATBACK COVER WITH PAD  . Refer to REASSEMBLY - Step 12
  4. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH  . Refer to REASSEMBLY - Step 13
  5. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH  . Refer to REASSEMBLY - Step 14
  6. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY  . Refer to REASSEMBLY - Step 15
  7. INSTALL REAR SEATBACK LOCK ASSEMBLY  . Refer to REASSEMBLY - Step 16
  8. INSTALL REAR SEATBACK LOWER LOCK BEZEL  . Refer to REASSEMBLY - Step 17
  9. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY 
    1. Connect the rear center seat outer belt with the bolt.
      Fig 3: Identifying Rear Center Seat Outer Belt Assembly Bolt
      GTY198901Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

  10. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY  . Refer to REASSEMBLY - Step 19
  11. INSTALL REAR SEAT LOCK STRIKER COVER  . Refer to REASSEMBLY - Step 20
  12. INSTALL REAR SEATBACK COVER  . Refer to REASSEMBLY - Step 21
  13. INSTALL TONNEAU COVER HOOK HOLDER  . Refer to REASSEMBLY - Step 22
  14. INSTALL REAR SEAT ARMREST ASSEMBLY  . Refer to REASSEMBLY - Step 23
  15. INSTALL NO. 1 SEAT ARMREST CAP  . Refer to REASSEMBLY - Step 24
  16. INSTALL REAR SEAT RECLINING INNER COVER  . Refer to REASSEMBLY - Step 26
  17. INSTALL SEAT TRACK UPPER RAIL COVER  . Refer to REASSEMBLY - Step 27
  18. INSTALL REAR NO. 1 SEAT CUSHION COVER WITH PAD  . Refer to REASSEMBLY - Step 34
  19. INSTALL REAR SEAT CUSHION MOULDING RH  . Refer to REASSEMBLY - Step 46
  20. INSTALL SEAT ADJUSTER COVER CAP  . Refer to REASSEMBLY - Step 47
  21. INSTALL REAR SEAT CUSHION MOULDING LH  . Refer to REASSEMBLY - Step 48
  22. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE  . Refer to REASSEMBLY - Step 49
  23. INSTALL REAR SEAT RECLINING UPPER COVER  . Refer to REASSEMBLY - Step 50
  24. INSTALL REAR NO. 1 SEAT ASSEMBLY  . Refer to INSTALLATION - Step 1
  25. CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY (w/ Remote Folding Function)  . Refer to INSTALLATION - Step 2
  26. INSPECT REAR SEAT SLIDE ADJUSTER LOCK  . Refer to INSTALLATION - Step 3
  27. INSTALL REAR SEAT LEG SIDE COVER  . Refer to INSTALLATION - Step 4
  28. INSTALL REAR INNER TRACK BRACKET COVER  . Refer to INSTALLATION - Step 5
  29. INSTALL REAR OUTER TRACK BRACKET COVER  . Refer to INSTALLATION - Step 6
  30. INSTALL REAR SEAT TRACK BRACKET COVER  . Refer to INSTALLATION - Step 7
  31. INSTALL REAR SEAT HEADREST ASSEMBLY  . Refer to INSTALLATION - Step 8
  32. INSTALL REAR CENTER SEAT ASSEMBLY 
scientia non olet · About LEMON Manuals