How To Determine Nut Strength

WARNING: This page is about a different variant/trim than selected.

NUT TYPE

Present Standard Hexagon Nut	Old Standard Hexagon Nut		Class
Present Standard Hexagon Nut	Cold Forging Nut	Cutting Processed Nut	Class
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002 No Mark	-	-	4N
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002 No Mark (w/ Washer)	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002 No Mark (w/ Washer)	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002 No Mark	5N (4T)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002	-	-	6N
-	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002	7N (5T)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002	-	-	8N
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002 No Mark	10N (7T)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002	-	-	11N
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002	-	-	12N

HINT:

*: Nut with 1 or more marks on one side surface of the nut.
Use a nut with the same nut strength classification number (or more) as the bolt strength classification number when tightening parts with a bolt and nut.

Example:

Bolt = 4T
Nut = 4N or more