DTC B1830/57: Short in Curtain Shield Squib RH Circuit; DTC B1831/57: Open in Curtain Shield Squib RH Circuit; DTC B1832/57: Short to GND in Curtain Shield Squib RH Circuit; DTC B1833/57: Short to B+ in Curtain Shield Squib RH Circuit: Description
WARNING: This page is about a different variant/trim than selected.
The curtain shield squib RH circuit consists of the center airbag sensor assembly and curtain shield airbag assembly RH.
The center airbag sensor assembly uses this circuit to deploy the airbag when deployment conditions are met.
These DTCs are stored when a malfunction is detected in the curtain shield squib RH circuit.
| DTC No. |
DTC Detection Condition |
Trouble Area |
| B1830/57 |
- The center airbag sensor assembly receives a line short circuit signal in the curtain shield squib RH circuit during primary check.
- Curtain shield squib RH malfunction
- Center airbag sensor assembly malfunction
|
- Floor wire
- Curtain shield airbag assembly RH (Curtain shield squib RH)
- Center airbag sensor assembly
|
| B1831/57 |
- The center airbag sensor assembly receives an open circuit signal in the curtain shield squib RH circuit.
- Curtain shield squib RH malfunction
- Center airbag sensor assembly malfunction
|
- Floor wire
- Curtain shield airbag assembly RH (Curtain shield squib RH)
- Center airbag sensor assembly
|
| B1832/57 |
- The center airbag sensor assembly receives a short circuit to ground signal in the curtain shield squib RH circuit.
- Curtain shield squib RH malfunction
- Center airbag sensor assembly malfunction
|
- Floor wire
- Curtain shield airbag assembly RH (Curtain shield squib RH)
- Center airbag sensor assembly
|
| B1833/57 |
- The center airbag sensor assembly receives a short circuit to B+ signal in the curtain shield squib RH circuit.
- Curtain shield squib RH malfunction
- Center airbag sensor assembly malfunction
|
- Floor wire
- Curtain shield airbag assembly RH (Curtain shield squib RH)
- Center airbag sensor assembly
|