DTC B1000/31: Center Airbag Sensor Assembly Malfunction: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK DTC
- Check for DTCs, refer to DTC CHECK / CLEAR
.RESULT
Result Proceed to DTC B1000/31 is output A DTC B1000/31 and other DTCs are output B NOTE:If only DTC B1000/31 is output, do not clear the DTCs, replace the center airbag sensor assembly.
HINT:
If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.
B → See step 3
A → See step 2
- Check for DTCs, refer to DTC CHECK / CLEAR
.
- REPLACE CENTER AIRBAG SENSOR ASSEMBLY. Refer to REMOVAL
- GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART