DTC B1411/11: Room Temperature Sensor Circuit: Description
WARNING: This page is about a different variant/trim than selected.
The room temperature sensor is installed in the instrument panel to detect the room temperature and control the heater and air conditioning AUTO mode. The resistance of the room temperature sensor changes in accordance with the room temperature. As the temperature decreases, the resistance increases. As the temperature increases, the resistance decreases.
The air conditioning amplifier applies a voltage (5 V) to the room temperature sensor and reads voltage changes as changes in the resistance of the room temperature sensor.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1411/11 | Open or short in room temperature sensor circuit |
|