LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat (Service Information) (Hybrid) >> Seat Variable Cushion Switch >> Removal >> Removal

Seat Variable Cushion Switch: Removal: Removal

  1. REMOVE DECK BOARD ASSEMBLY  . Refer to REMOVAL - Step 1
  2. REMOVE BATTERY SERVICE HOLE COVER ASSEMBLY  . Refer to REMOVAL - Step 2
  3. REMOVE FRONT SEAT HEADREST ASSEMBLY  See step  3
  4. REMOVE FRONT OUTER SEAT TRACK COVER  See step  4
  5. REMOVE FRONT INNER SEAT TRACK COVER  See step  5
  6. REMOVE REAR OUTER SEAT TRACK COVER  See step  6
  7. REMOVE REAR INNER SEAT TRACK COVER  See step  7
  8. REMOVE FRONT SEAT ASSEMBLY  See step  8
  9. REMOVE RECLINING POWER SEAT SWITCH KNOB  See step  1
  10. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB  See step  2
  11. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY  See step  3
  12. REMOVE SEAT VARIABLE CUSHION SWITCH 
    1. Remove the 2 screws and the seat variable cushion switch.
      Fig 1: Identifying Seat Variable Cushion Switch Screws
      GTY190295Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals