Vehicle Position Mark Deviates Greatly: Procedure

1. Check that the GPS mark is displayed.
   Fig 1: Checking To See That GPS Mark Is Displayed

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   GPS mark is displayed.

   TEXT IN ILLUSTRATION
   
   

   *a

   Example

NG → See step   2 

OK: Go to next step 

1. Enter the "Vehicle Sensors" screen. Refer to Check GPS & Vehicle Sensors in Operation Check, refer to OPERATION CHECK .
   Fig 2: Screen Display - GPS & Vehicle Sensor

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check that these readings are almost equal.

   OK

   The readings are almost equal.

NG → See step   4 

OK: Go to next step 

1. Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check, refer to OPERATION CHECK .
2. Check that the display changes between ON and OFF according to the shift lever operation.
   Fig 3: Identifying Vehicle Signal Check Mode Screen

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   Shift Lever Position	Display
   Except R	OFF
   R	ON

   HINT: 

   The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

NG → See step   6 

OK → See step   7