LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System (Diagnostic Codes & Symptom Tests) (Hybrid) >> Navigation System >> Poor Sound Quality in All Modes (Low Volume) >> Procedure

Poor Sound Quality in All Modes (Low Volume): Procedure

  1. CHECK AUDIO SETTINGS 
    1. Enter the "Sound Settings" screen by pressing the "Sound" switch on the audio display.
      Fig 1: Checking Audio Settings Screen
      GTY303462Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Set "Bass", "Mid" and "Treble" to the initial values and check that sound is normal.

      OK

      Malfunction disappears.

      HINT: 

      Sound quality adjustment measures vary according to the type of the amplifier.

      TEXT IN ILLUSTRATION

      *a Example

    NG → See step   2 

    OK → END 

  2. COMPARE WITH ANOTHER VEHICLE OF SAME MODEL 
    1. Compare with another vehicle of the same model.
      1. Compare with another vehicle of the same model which does not have trouble to see if there is any difference in the sound quality.

        OK

        No difference is found.

    NG → See step   3 

    OK → END 

  3. PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE