Current Position Display does not Appear: Procedure
- CHECK NAVIGATION RECEIVER ASSEMBLY
- Display the "Map DVD" screen.
- Check if a disc is inserted into the map disc slot.
NG → INSERT MAP DISC IN MAP DISC SLOT
OK: Go to next step
- CHECK MAP DISC
- Check that a map disc is inserted and that it is not deformed or cracked.
OK
No deformations or cracks on the map disc
NG → REPLACE MAP DISC
OK → See step 3
- Check that a map disc is inserted and that it is not deformed or cracked.
- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE