LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System (Diagnostic Codes & Symptom Tests) (Hybrid) >> Navigation System >> Cannot Call in a Certain Place >> Procedure

Cannot Call in a Certain Place: Procedure

  1. CHECK SURROUNDING CONDITIONS 
    1. Check if the cellular phone can make calls in a certain place.

      OK

      The cellular phone can make calls.

    NG → END (CELLULAR PHONES CAN ONLY FUNCTION IN CELLULAR SERVICE AREAS) 

    OK: Go to next step 

  2. CHECK RECEPTION 
    1. Display the "Phone" screen.
    2. Check the "Bluetooth" connection indicator ("BT" indicator).
      Fig 1: Identifying Bluetooth Connection Indicator On Phone Screen
      GTY299201Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *a Example

      Result

      Result Proceed to
      "BT" indicator color is yellow. A
      "BT" indicator color is blue. B
      No connection mark is displayed. C

    B → See step   3 

    C → SELECT A REGISTERED CELLULAR PHONE OR REGISTER A "Bluetooth" COMPATIBLE PHONE 

    A → MOVE CELLULAR PHONE TO A LOCATION WHERE "BT" MARK TURNS BLUE 

  3. REPLACE NAVIGATION RECEIVER ASSEMBLY. Refer to  REMOVAL