DTC 62-47: High Temperature; DTC 63-47: High Temperature: Procedure
- CHECK RADIO RECEIVER ASSEMBLY
- Park the vehicle in a cool place.
- Operate the radio receiver assembly after it has sufficiently cooled down, and start the engine.
NEXT: Go to next step
- CLEAR DTC
- Clear the DTCs, refer to DTC CHECK / CLEAR .
NEXT: Go to next step
- CHECK DTC
- Recheck for DTCs and check if the same DTC is output again.
OK
No DTCs are output.
NG → See step 4
OK → END
- Recheck for DTCs and check if the same DTC is output again.
- REPLACE RADIO RECEIVER ASSEMBLY. Refer to REMOVAL