LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Combination Meter (Service Information) (Hybrid) >> Light Control Rheostat >> Removal >> Removal

Light Control Rheostat: Removal: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  . Refer to REMOVAL - Step 20
  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH  . Refer to REMOVAL - Step 21
  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to REMOVAL - Step 23
  4. REMOVE LIGHT CONTROL RHEOSTAT 
    1. Disengage the 2 claws and remove the light control rheostat.
      Fig 1: Identifying Light Control Rheostat Claws
      GTY175052Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals