LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Service Information) (Hybrid) >> High Mounted Stop Light Assembly >> Inspection >> Inspection

High Mounted Stop Light Assembly: Inspection: Inspection

  1. INSPECT HIGH MOUNTED STOP LIGHT ASSEMBLY 
    1. Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
      Fig 1: Identifying High Mounted Stop Light Assembly Connector
      GTY188378Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the high mounted stop light comes on.

      OK

      The light comes on.

      If the result is not as specified, replace the light assembly.

scientia non olet · About LEMON Manuals