Short to GND in CAN Bus Line: Description
There may be a short circuit between the CAN bus lines and GND when the resistance between terminals 6 (CANH) and 4 (CG) or terminals 14 (CANL) and 4 (CG) of the DLC3 is below 200 Ω.
| Symptom |
Trouble Area |
| The resistance between terminals 6 (CANH) and 4 (CG) or terminals 14 (CANL) and 4 (CG) of the DLC3 is below 200 Ω. |
- Short between CAN bus lines and GND
- ECM
- Air conditioning amplifier assembly
- Skid control ECU assembly
- Navigation receiver assembly*
- Hybrid vehicle control ECU
- Yaw rate sensor assembly
- Center airbag sensor assembly
- Steering angle sensor
- Combination meter assembly
- Power steering ECU assembly
- Main body ECU (instrument panel junction block assembly)
- Bus buffer ECU (accessory gateway)
- No. 1 junction connector
- No. 2 junction connector
- DLC3 CAN branch wire or connector
|