LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Can Communication System (W/O Smart Key) (Diagnostic Codes & Circuit Tests) (Hybrid) >> CAN COMMUNICATION SYSTEM (w/o Smart Key System) >> ECM Communication Stop Mode >> Description

ECM Communication Stop Mode: Description

Detection Item Symptom Trouble Area
ECM Communication Stop Mode Either condition is met:
  • "Engine" is not displayed on the "Bus Check" screen.
  • "ECM Communication Stop Mode" in "DTC Combination Table" applies.
  • Power source or inside of ECM
  • ECM CAN branch wire or connector
  • ECM