LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> FJ Cruiser RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge (Service Information) >> Light Control Rheostat >> Removal >> Removal

Light Control Rheostat: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY  . Refer to REMOVAL - Step 27
  3. REMOVE LIGHT CONTROL RHEOSTAT 
    Fig 1: Identifying Light Control Rheostat & Connector
    GTY206892Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connector.
    2. Disengage the 2 claws and remove the light control rheostat.
scientia non olet · About LEMON Manuals