DTC P0A0F-204: Engine Failed to Start; DTC P0A0F-205: Engine Failed to Start; DTC P0A0F-524: Engine Failed to Start; DTC P0A0F-525: Engine Failed to Start; DTC P0A0F-533: Engine Failed to Start; DTC P0A0F-534: Engine Failed to Start: Description
WARNING: This page is about a different variant/trim than selected.
The hybrid vehicle control system performs the fail-safe control based on an abnormal signal from the EFI system.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0A0F | 204 | Abnormal signal input from the ECM (abnormal engine output) |
|
| P0A0F | 205 | Abnormal signal input from the ECM (engine is unable to start) |
|
| P0A0F | 524 | Signal indicating abnormality input from the ECM (NE signal error) |
|
| P0A0F | 525 | Signal indicating abnormality input from the ECM (G signal error) |
|
| P0A0F | 533 | Abnormal signal input from the ECM (abnormal engine output when running out of fuel) |
|
| P0A0F | 534 | Abnormal signal input from the ECM (fuel level not sufficient to start the engine) |
|