DTC P0A08-101: DC / DC Converter Status Circuit: Procedure

WARNING: This page is about a different variant/trim than selected.

CHECK PACKAGE TRAY TRIM PANEL ASSEMBLY
1. Check that the air intake grill of the package tray trim panel assembly is not clogged.
  OK
  
  The air intake grill is not clogged.
NG → REMOVE FOREIGN OBJECT

OK: Go to next step
CHECK AIR DUCT (ALL)
1. Check if the duct is installed correctly.
  OK
  
  The duct is installed correctly.
2. Check the duct for clogging.
  OK
  
  The duct is not clogged.
NG → REPAIR OR REPLACE AIR DUCT (ALL)

OK: Go to next step
REPLACE HYBRID VEHICLE CONVERTER
1. Replace the hybrid vehicle converter (DC/DC converter). Refer to REMOVAL .
NEXT: Go to next step
CHECK AUXILIARY BATTERY
1. Turn the power switch on (READY).
2. Leave the vehicle for 5 minutes.
3. Measure the voltage of the auxiliary battery.
  Standard voltage
  
  More than 10.5 V
NG → CHECK AND REPLACE AUXILIARY BATTERY

OK → COMPLETED